2.0 KiB
+++ title = "Configuring an APRS receiver with an RTL-SDR and Direwolf" tags = ["aprs", "amateur radio", "vhf", "direwolf"] date = "2021-12-16" +++
What is APRS? Automatic Packet Reporting System! Essentially a VHF radio sending out GPS location pings in the 2M ham band which can be seen at aprs.fi. If you take a look at that link you will often see radiosondes and their reported data, weather stations as well as bunch of amateur operators transmitting data all over the world. Fascinating stuff.
I recently got my hands on an RTL-SDR v3 which claims much better accuracy and performance over previous models. Figured I'd give it a go receiving APRS and see what I could get. I did a bit of research and tested a few different packages but ended up settling with Direwolf. For those interested, I'm running this on an Ubuntu 20.04 LXC container with USB passthrough for the SDR itself.
Here is a run through of installing/configuring an APRS feeder with an SDR and Direwolf.
# Install required packages
apt-get install rtl-sdr direwolf
My sdr.conf file for reference with callsign and location blanked out.
root@aprs:~# cat /root/sdr.conf
ACHANNELS 1
ADEVICE null null
CHANNEL 0
MYCALL <CALLSIGN>-10
IGSERVER aunz.aprs2.net
IGLOGIN <CALLSIGN> 23018
MODEM 1200
AGWPORT 8000
KISSPORT 8001
PBEACON sendto=IG delay=0:30 every=10:00 symbol="/-" lat=-12.3456 long=12.3456 alt=in_meter comment="RTLSDR"
This is my run.sh script I currently launch in screen until I can get around to setting up a systemd service.
It simply gets the output from the APRS frequency and pipes it into direwolf launched with our above sdr.conf config.
#!/bin/bash
# -f 144.575M Tunes to 144.575 Mhz
# -g 20.7 is the gain value, rtl_test to view available options
rtl_fm -f 144.575M -s 22050 -g 20.7 | direwolf -c /root/sdr.conf -r 22050 -D 1 -B 1200 -
If you set up the LONG/LAT coords properly, you should be able to view your home station on aprs.fi!